Adhesive “Star”

**Description**

The new generation adhesive is based on a completely new technology, allowing it to bond quickly regardless of fluctuations in air temperature and humidity. However, the adhesive works most effectively when conditions are ideal. The eyelash adhesive has a liquid consistency (but not as thin as water), making it easy to use. It is suitable for classic, large (5-7D) volume fans, as well as pre-made fans. The bonding with natural lashes is very fast. A unique feature of this adhesive is that it quickly loses its sticky layer, preventing the eyelash extensions from sticking together, allowing for consecutive application without the risk of clumping. The adhesive is best suited for experienced lash technicians due to its quick bonding time, which may be too fast for beginners, potentially causing the lashes to fall off.

The advantage of the liquid adhesive is the thin bond between the extension and the natural lash, ensuring a visually clean work with strong and durable retention. The adhesive remains in a liquid state in the bottle for a long time.

**Composition**

The main ingredient in the adhesive is Ethyl Cyanoacrylate, which is known for its fast-drying and strong bonding properties.

**Adhesive Properties**
– Speed: 0.3 seconds
– Consistency: Liquid
– Fumes: Not noticeable
– Retention: Very strong
– Color: Black
– Volume: 5 ml

*Shelf life unopened :1.3 years

*The adhesive is latex and formaldehyde-free!

**Optimal Conditions for Adhesive Use:**
Humidity: 55-60%, Temperature: 20-25°C, although this adhesive can also perform in more extreme conditions (e.g., 28°C heat).

*If the humidity is low, we recommend using an adhesive accelerator to help the adhesive bond immediately with the natural lashes. Use the accelerator only on natural lashes and only if necessary.

**Preparing Lashes Before Application:**

It is important to know that for the adhesive to bond well with the natural lashes, they must be properly prepared. Use the following 3-step lash cleaning process:

1. Remove makeup with an oil-free product (I recommend the new  Lashstar make up remover foam)
2. Wash off the makeup remover with a special lash foam and warm water.
3. Remove sebum from the lashes.

*Both sebum pH and eyelash adhesive pH are acidic. If sebum is not properly removed from the lashes, no reaction or bonding can occur between the natural lash and the adhesive! Sebum secretion is constant, so if you notice the lash is not bonding and is slipping on the natural lash, repeat the sebum removal process.

*Remember, good retention depends on the technician, not the adhesive!

**Storing Eyelash Adhesive**

To keep the adhesive as effective as possible, it is important to take proper care of it. Here are some tips:

1. Shake the adhesive without the cap on (use cling film for this) to keep the adhesive cap clean and ensure the bottle cap can be tightly closed.
2. After placing a drop of adhesive on the surface, clean the adhesive nozzle with cling film.
3. Keep the adhesive drop in a glue ring to preserve its best properties for longer.
4. Do not leave the adhesive open for long; close the bottle as soon as possible to prevent moisture from entering.
5. Ensure the adhesive cap is tightly sealed.
6. Store the adhesive bottle in an airtight container with silica gel to absorb any moisture.
7. Store the adhesive in a cooler place (12°C-24°C) and avoid direct sunlight. Also, do not store the adhesive near radiators or heaters.
8. Keep the adhesive bottle in a horizontal position to prevent the adhesive from separating.

Once opened, the adhesive retains its best properties for up to 2 months. Unopened, it can be stored in a cool, sun-protected place for up to 1 year and 3 months.

*If the technician works daily, we recommend replacing the adhesive every month to ensure maximum retention for clients and comfort and speed for the technician.

**Safety Requirements**
*Eyelash adhesive should only be used by a certified lash technician!
*Avoid contact with the eyes.
*Avoid contact with the skin (maintain a distance of at least 0.2-0.3 mm from the lash root).
*Do not use the adhesive if it has expired.

**Adhesive Composition:** Ethyl Cyanoacrylate, PMMA, Hydroquinone, Carbon Black